|
КАТАЛОГ
ТОВАРОВ |
 |
|
| |
|
|
|
|
PIKO 56122«Цифровой декодер для локомотивов Hobby»
• Motor energising at a frequency of 18.75 kHz ensuring smooth running• 14, 27, 28, 128 speed steps• Short (1-127) and long (128-9999) addresses• Minimum, maximum, and average speed can be set• Main track programming possible (DCC)• Shunting gear (half speed) via F3• Starting and braking retardation via F4• Directional lighting via F0• Reacts to DCC standard braking signal or DC track sections• All outputs are fused• AC or DC operation with automatic commutation• All CVs must be programmed with DCC or Motorola digital equipment• DCC operation can be programmed by register, CV direct, or page programmingВ отличие от декодера "Classic", декодер "Hobby" не обладает следующими свойствами:• Table of speed steps for 14 and 28 speed step modes• Two outlets for special functions via F1 an F2, dimmable• Sound interface SUSI (4-pole mini-jack) for sound modules (such as the PIKO sound module # 56190) or other modules for the control of additional functions (F1 to F12)• Generates the address identification to energise the Uhlenbrock Lissy mini transmission module # 68400• Protected against overheatingTechnical DataAddress range: 1-9,999 (long DCC addresses)Max. motor current: 1.0 A (running) / 2 A (starting)Function outputs: 2 x eaxh1.0 A (directional)Total load: max. 1.0 ASize: 12.5x22x5 mm
- Артикул: PIKO 56122
- Название: Цифровой декодер для локомотивов Hobby
- Производство: Германия
- Размер: H0 (1:87)
- Серия: Hobby
| |
Смотрите так же:
| | |
|
| | |
|
